Summer may only just be behind us, but now is one of the best times to start thinking about how your building will cope when the warmer weather returns.
Every year, the first properly hot spell brings the same familiar problems. Offices become uncomfortable, classrooms overheat, glare makes screens difficult to see and cooling systems suddenly have to work much harder.
That is usually when people start searching for a solution.
The trouble is, by that point everyone else is searching too.
The best time to tackle overheating is before it starts
Solar gain is not just a problem during a heatwave. Sunlight passes through glazing throughout the year, gradually increasing the temperature inside a building.
During the warmer months, this can create uncomfortable working and learning environments, particularly in buildings with large areas of glazing, rooflights, atriums or windows that receive prolonged direct sunlight.
Waiting until spring or summer to investigate the problem can mean making decisions under pressure. Assessments need to be completed, the glazing must be checked and a suitable product needs to be selected before the work can even begin.
Starting during autumn or winter gives facilities, estates and property teams more time to understand the problem properly and plan ahead.

It is not simply a case of choosing the darkest film
One of the most common misconceptions about solar control window film is that a darker or more reflective appearance automatically means better performance.
There is much more to consider.
The correct product will depend on several factors, including:
- The type and construction of the glass
- Whether the film should be applied internally or externally
- The direction the glazing faces
- The amount of solar exposure
- The required level of heat and glare reduction
- The appearance of the building
- Whether maintaining natural light and visibility is important
Selecting an unsuitable film can affect performance and, in some cases, increase the risk of thermal stress in the glass. This is why the glazing should always be assessed before a recommendation is made.
At Bonwyke, we help customers look at the full picture rather than simply choosing a product from a list.
Window film or air conditioning?
Air conditioning can be an important part of managing indoor temperatures, but it deals with heat after it has already entered the building.
Solar control window film takes a different approach. It is designed to reduce the amount of solar energy passing through the glazing, helping to address one of the causes of overheating.
Depending on the building and the film selected, this can help to:
- Create more comfortable internal temperatures
- Reduce uncomfortable hot spots near windows
- Improve screen visibility by controlling glare
- Protect furnishings and interiors from UV-related fading
- Reduce the demand placed on cooling systems
- Maintain natural light and views through the glazing
Window film and air conditioning do not have to be an either-or decision. In many buildings, reducing solar gain at the glass can support the cooling system and help it operate more effectively.
Internal and external solar control films
Some glazing is suitable for an internally applied solar film, while other glass types or building conditions may require an external solution.
External solar control films can be particularly useful when a larger proportion of the sun’s energy needs to be rejected before it passes through the glazing. Bonwyke’s expanding range of external films gives customers more options when matching performance, appearance and glass compatibility.
External films must be installed and finished correctly. Careful preparation of the glass is essential, and exposed film edges will normally require sealing with a suitable edge sealant to help protect the installation from moisture and weathering.
Choosing the right film is only one part of achieving a reliable result. Correct preparation and application matter too.
What about difficult glazing?
Conventional window film is not the only option available.
Rooflights, atriums, curved glazing and other difficult areas can present additional challenges. Where a traditional film is unsuitable or difficult to apply, a specialist solar control coating such as AVSunWyke may provide an alternative.
This is why it helps to start the conversation early. With enough time to assess the building and understand the glazing, it is much easier to identify the most appropriate solution.

A more comfortable building starts with a proper assessment
If a building became too hot this summer, it is unlikely that the problem will simply disappear next year.
Now is the time to review which rooms were affected, when the overheating occurred and which elevations received the most sunlight. Feedback from the people using the building can also be valuable, particularly in offices, schools, healthcare settings and other busy commercial environments.
Photographs, glazing details and approximate measurements can provide a useful starting point. From there, the correct film options can be considered based on the glass, the building and the result you need to achieve.
Planning ahead removes the pressure of trying to find an immediate solution during the busiest part of the year.
Prepare now, rather than waiting for the spring rush
Solar control is naturally associated with warm weather, but autumn and winter are the ideal seasons for planning.
It gives you time to assess the glazing, compare suitable products and organise the work before temperatures begin to rise again.
Bonwyke supplies a wide range of solar control window films, including four new external film options, and can help trade customers identify the right product for the glass and the problem they are trying to solve.
If your customers experienced excessive heat, glare or uncomfortable rooms this summer, now is the time to start planning for next year.
Call the Bonwyke team on 01329 22 2299 or complete our enquiry form below. Tell us about the glazing and the problem you need to solve, and we will help you explore the most suitable options.







